TG15 $1661.00 (Set)
Description
General purpose sliding wedge, self tightening grips supplied with straight cut faces as standard. Two additional face options are available.
Specification
- Maximum Capacity 5 kN 1124 lbf
- Minimum Load Cell 100 N 22.5 lbf
- Gripping Length 50 mm 2.0 in
- Maximum Sample Width 25 mm 1.0 in
- Maximum Sample Thickness 10 mm 0.4 in
- Eye End Diameter 15.85 mm 5/8 in
- Weight Each 1.5 Kg 3.3 lb
- Length Each 125 mm 5.0 in
- Temperature Limits Ambient
Applications
Tensile testing of flat or round rigid materials, plastics, light metals etc.. by stretching a sample to break and recording the relationship between force and extension.
TG270 $2,938.00 (Set)
Description
Capstan Action Parallel Wedge Grip supplied with straight cut faces for flat samples as standard.
Capstan action enables the sample to be held tightly in the jaws before commencing the test. Available with a range of interchangeable jaw faces.
Specification
- Maximum Capacity 30 kN 6744 lbf
- Minimum Load Cell 500 N 112 lbf
- Gripping Length 50 mm 2.0 in
- Max Sample Width 25 mm 1.0 in
- Max Sample Thickness 11.5 mm 0.5 in
- Eye End Diameter 31.7 mm 1.2 in
- Weight Each 4.5 Kg 1.0 lb
- Length Each 195 mm 7.7 in
- Temperature Limits -70°C +200°C
Applications
Tensile testing for general metallurgical and composite applications by stretching a
sample to break and recording the relationship between force and extension.
TG280 $4,390.00 (Set)
Description
Capstan Action Parallel Wedge Grip supplied with straight cut faces for flat samples as standard. Capstan action enables the sample to be held tightly in the jaws before commencing the test. Available with a range of interchangeable jaw faces.
Specification
- Maximum Capacity 50 kN 11240
- Minimum Load Cell 500 N 112.4
- Gripping Length 50 mm 2.0 in
- Max Sample Width 25 mm 1.0 in
- Max Sample Thickness 16.5 mm 0.6 in
- Eye End Diameter 31.7 mm 1.25 in
- Weight Each 4.5 Kg 10 lb
- Length Each 195 mm 7.7 in
- Temperature Limits -70°C +200°C
Applications
Tensile testing for general metallurgical and composite applications by stretching a
sample to break and recording the relationship between force and extension.
TG295 $10,620 (Set)
Description
Heavy duty capstan action wedge grip supplied complete with one set of cross cut jaw faces for samples up to 18mm thick but other jaws are available. The capstan action moves the grip body with relation to the jaws to minimise the preload applied to the samplewhen the grips are tightened.
Specification
- Maximum Capacity 100 kN 1.1 lbf
- Minimum Load Cell 5 kN 1.1 lbf
- Standard Jaw Faces Cross cut faces for samples up to 21
- mm (0.8 in) thick. 50 mm (2 in) wide x 70 mm (3 in)
- Maximum Sample Thickness 21 mm 0.08 in
- Eye End Diameter 15.85 mm 0.62 in
- Weight Each 13.5 Kg 0.22 lb
- Length Each 293 mm 4.0 in
- Temperature Limits -70°C +200°C
Applications
Tensile testing for general metallurgical and composite applications by stretching a sample to break and recording the relationship between force and extension.
Wedge Grips
Please scroll down to see products or
use bookmarks:
TG352 $17,558 (Set)
Description
Heavy Duty Capstan Action Parallel Wedge Grip. Capstan action enables the sample to be held tightly in the jaws before commencing the test. Available with a range of interchangeable jaw faces.
Specification
- Maximum Capacity 300 kN 67443 lbf
- Minimum Load Cell 5 kN 1124 lbf
- Gripping Length 100 mm 4.0 in
- Max Sample Width 50 mm 2.0 in
- Max Sample Thickness 12 mm 0.5 in
- Eye End Diameter 50 mm 2.0 in
- Weight Each 30 Kg 66 lb
- Length Each 195 mm 7.7 in
- Temperature Limits -70°C +100°C
Applications
Tensile testing for general metallurgical and composite applications by
stretching a sample to break and recording the relationship between
force and extension.
The faces in the grips are quickly removed by turning two holding mechanisms on the front of the grips that rotate on screws, one for each grip face... and gently pulling the release lever to take the spring load off the faces. The replacement faces listed above have various surfaces that are engineered to hold specific materials. Please feel free to contact our office for assistance in selection of grips and/or faces.
The faces in the grips are quickly removed by turning two holding mechanisms on the front of the grips that rotate on screws, one for each grip face. The replacement faces listed above have various surfaces that are engineered to hold specific materials. Please feel free to contact our office for assistance in selection of grips and/or faces.
The faces in the grips are quickly removed by turning two holding mechanisms on the front of the grips that rotate on screws, one for each grip face. The replacement faces listed above have various surfaces that are engineered to hold specific materials. Please feel free to contact our office for assistance in selection of grips and/or faces.
The faces in the grips are quickly removed by screws, one for each grip face. The replacement faces listed above have various surfaces that are engineered to hold specific materials. Please feel free to contact our office for assistance in selection of grips and/or faces.
The faces in the grips are quickly removed by screws, one for each grip face. The replacement faces listed above have various surfaces that are engineered to hold specific materials. Please feel free to contact our office for assistance in selection of grips and/or faces.
