Vice Style Grips
Please scroll down to see products or
use bookmarks:
Spring Loaded Tension Grip
Lightweight, spring loaded, rubber faced clamp grips for very light loads. Ideal for paper, thin plastic film, foils, etc.
Capacity: 5 N, 1.12 lbf
Packaging: Includes upper and lower grip.
Applications
Lightweight grip for tensile testing of paper, thin plastic film and foils, etc by stretching the sample to fracture and recording the relationship between force and extension.
Specification
- Maximum Capacity 5 N 1.12 lbf
- Minimum Loadcell 5 N 1.12 lbf
- Maximum Sample Width 25 mm 0.98 in
- Maximum Sample Thickness 2 mm 0.08 in
- Eye End Diameter 15.85 mm 5/8 in
- Weight Each 0.1 Kg 0.2 lb
- Length Each 100 mm 3.94 in
- Temperature Limits Ambient
Thin Film Vice Action Grip 500 N - 112.4 lbf
Description
General purpose thin film vice grips, with easy to operate screw action. Each grip is fitted with flat, square, rubber coated jaw faces.
Specification
- Specification
- Maximum Capacity 500 N 112.4 lbf
- Minimum Load Cell 20 N 4.5 lbf
- Maximum Sample Width 25 mm 1.0 in
- Maximum Sample Thickness 3 mm 0.1 in
- Eye End Diameter 15.85 mm 5/8 in
- Weight Each 0.5 Kg 1.1 lb
- Length Each 75 mm 3.0 in
- Temperature Limits Ambient
Applications
Tensile testing of paper, rubber, thin plastic film, textiles, waxed paper and films
containing slip additive by stretching a sample to break and recording the
relationship between force and extension.
Quick Release Vice Action Grip 1 kN - 225 lbf
Description
Quick release vice action grips, supplied with interchangeable jaw faces
Specification
- Maximum Capacity 1 kN 225 lbf
- Minimum Load Cell 50 N 11.2 lbf
- Maximum Sample Width 100 mm 4.0 in
- Maximum Sample Thickness 12 mm 0.5 in
- Eye End Diameter 15.85 mm 5/8 in
- Weight Each 1.0 Kg 2.2 lb
- Length Each 150 mm 6.0 in
- Temperature Limits -70°C +200°C
Applications
Tensile testing of paper, rubber, thin plastic film, woven and non woven textiles
by stretching a sample to break and recording the relationship between force and extension. This is a very general purpose grip which can be used for a wide variety of samples
Adjustable Rear Face Vice Grip 5 kN - 1124 lbf
Description
Vice action grips with fully adjustable faces for alignment purposes. The grips are supplied as standard with plain jaw faces 25mm x 25mm (A range of Interchangeable jaw faces are available to order)
Specification
- Maximum Capacity 5 kN 1124 lbf
- Minimum Load Cell 50 N 11.24 lbf
- Maximum Sample Width 50 mm 2.0 in
- Maximum Sample Thickness 20 mm 0.8 in
- Eye End Diameter 15.85 mm 5/8 in
- Weight Each 1.0 Kg 2.2 lb
- Length Each 50mm 2.0 in
- Temperature Limits Ambient
Applications
Tensile testing of paper, rubber, plastics, textiles, foils and films by stretching a sample to break and recording the relationship between force and extension.
Extra Pressure Vice Grip 5kN (1124 lbf)
Description
Vice action grips supplied with an independent tightening tool for extra pressure. One half of the grip faces are corrugated and the remaining half serrated to eliminate sample slippage whilst performing a test.
Specification
- Maximum Capacity 5 kN 1124 lbf
- Minimum Load Cell 100 N 22.5 lbf
- Maximum Sample Width 55 mm 2.2 in
- Maximum Sample Thickness 12 mm 0.5 in
- Gripping Length 35 mm 1.4 in
- Eye End Diameter 15.85 mm 5/8 in
- Weight Each 1.5 Kg 3.3 lb
- Length Each 65 mm 2.6 in
- Temperature Limits -70°C +200°C
- TG300: Extra Pressure Vice Grip 5kN (1124 lbf)
Applications
TG300: Tensile testing of textiles, leather, etc.., by stretching a sample to break and recording the relationship between force and extension.
Extra Pressure Vice Grip
This vice action grip is supplied with an independent tightening tool for applying extra pressure. Both grip faces are serrated to prevent the sample from slipping during the test. Maximum sample width is 55 mm (2.17 in). Maximum sample thickness is 12 mm (1/2 in).
Capacity
10 kN, 2248 lbf
Packaging
Includes upper and lower grips.
Applications
Used for tensile testing of textiles and leather.
Specification
- Maximum Capacity 10 kN 2248 lbf
- Minimum Loadcell 100 N 22.5 lbf
- Maximum Sample Width 55 mm 2.17 in
- Maximum Sample Thickness 12 mm 1/2 in
- Gripping Length 25 mm 1.0 in
- Eye End Diameter 15.85 mm 5/8 in
- Weight Each 1.6 Kg 3.5 lb
- Length Each 65 mm 2.56 in
- Temperature Limits -70°C to 200°C -94°F to 392°F
Heavy Duty Vice Grip
This vice action grip is ideal for heavy duty applications up to 20 kN (4496 lbf). This grip is supplied with 50 x 100 mm (1.97 x 3.94 in) cross cut faces. Optional jaw faces are available.
Capacity
20 kN, 4496 lbf
Packaging
Includes upper and lower grips with 50 mm x 100 mm (1.97 x 3.94 in) cross cut faces. The TG25 is not included when ordering optional jaw faces.
Applications
Used for tensile testing on heavy duty textiles, harnesses, webbing, belts, sheeting, paper and cardboard stocks, rubber, plastics, metal and wood products.
