Pneumatically operated vice grips TG420/F are operated using a foot pedal. TG420/H are hand operated. Both are supplied with plain metal 25mm wide x 25mm faces as standard, but a series of interchangeable jaw faces are available as listed below.

General purpose grips for tensile testing of flat, ductile and rigid materials eg: rubber, plastics, textiles, etc.. where self tightening is required.

Part Number	Description	Price
01/1438	TG420/P1 Plain Faces, 25mm wide x 25mm	$506
01/1559	TG420/P4 Plain Faces, 50mm wide x 50mm	$733
01/1439	TG420/R1 Rubber Faces, 25mm wide x 25mm	$567
01/1521	TG420/R2 Rubber Faces, 50mm wide x 25mm	$733
01/1558	TG420/R4 Rubber Faces, 50mm wide x 50mm	$790
01/1440	TG420/C1 Cross Cut Faces, 25mm wide x 25mm	$834
01/1566	TG420/C4 Cross Cut Faces, 50mm wide x 50mm	$916

TG412/F (with Foot Pedal) $5,132    Click Here for Spec Sheet

TG412/H (with Hand Activated Switch Box) $5,571

Air operated vice grips available in two forms. TG412/H is operated using a hand switch, while TG412F uses a foot pedal. Both are supplied with plain metal faces as standard, but additional jaw faces are available as listed below.

General purpose grips for tensile testing of rubber, plastics, textiles etc.. where self tightening is required.

TG420

TG412

Please Notice:

Prices subject to change

Part Number	Description	Price
01/2330	TG412/P1 Plain Faces, 25mm wide x 25mm	$810
01/2326	TG412/P2 Plain Faces, 25mm wide x 50mm	$523
01/2331	TG412/P3 Plain Faces, 30mm wide X 38mm	$592
01/2329	TG412/P4 Plain Faces, 50mm wide X 50mm	$743
01/2333	TG412/C3 Cross Cut Faces, 30mm wide x 38mm	$790
01/2327	TG412/C4 Cross Cut Faces, 50mm wide x 50mm	$1043
01/2489	TG412/R1 Rubber Faces, 25mm wide x 25mm	$845
01/2325	TG412/R2 Rubber Faces, 25mm wide x 50mm	$567
01/2332	TG412/R3 Rubber Faces, 30mm wide x 38mm	$592
01/2328	TG412/R4 Rubber Faces, 50mm wide x 50mm	$743