Flexural Fixtures and Accessories
Please scroll down to see products or
use bookmarks:
Three Point Bend Jig
Description
Three Point Flexural Jig Operating in compression only. Specimen supports of 1mm, 4mm and 10mm (0.04, 0.16, 0.4 in) diameter are supplied as standard.
Specification
- Maximum Capacity 5 kN at 400 mm 1124 lbf at 15.7 in
- Minimum Load Cell 50 N 11.2 lbf
- Max Sample Width 50 mm 2.0 in
- Eye End Diameter 15.85 mm 5/8 in
- Weight 5 Kg 11 lb
- Temperature Limits Ambient
- Span Adjustment 10 - 400 mm 0.4 - 15.7 in
- Span Support Diameter 1,4,10 mm 0.04, 0.16, 0.4 in
Applications
Determining the flexural properties of rigid and semi-rigid materials such as glass, ceramics, composites, wood and rigid plastics, etc...in the form of rectangular bars of standard or non-standard dimensions, moulded directly or cut from sheets or other shapes. The following properties can be determined:
- Flexural Stress at a given time of test
- Flexural Stress at the conventional deflection (Flexural Stress at deflection X a preset figure determined by the standard used)
- Flexural Stress at Maximum Load
- Flexural Stress at Rupture Apparent Modulus of Elasticity in Flexure (modulus of elasticity determined by flexure test)
Heavy Duty Three Point Bend Jig
Description
Heavy Duty Three Point Flexural Jig operating in compression only, for performing unidirectional bending tests on rigid and semi rigid materials. Supplied with specimen supports of 10mm (0.4 in) diameter. A four point bend adaptor kit (TG62/4) is available to order.
Specification
- Maximum Capacity 100kN 22481 lbf
- Minimum Load Cell 500N 112.4 lbf
- Max Sample Width 150mm 6.0 in
- Eye End Diameter 31.7mm 1 1/4 in
- Weight of Blade 4.5Kg 10 lb
- Temperature Limits Ambient
- Span Adjustment 20 - 300mm 0.8 - 11.8 in
Applications
Determining the flexural properties of rigid and semi-rigid materials such as glass, ceramics, composites, wood and rigid plastics, etc...as above.
Heavy Duty Three Point Bend Jig
Description
Heavy Duty Three Point Flexural Jig operating in compression only, for performing unidirectional bending tests on rigid and semi rigid materials. A four point bend adaptor kit (TG62/4) is available to order.
Specification
- Maximum Capacity 300 kN 67443 lbf
- Minimum Load Cell 1 kN 225 lbf
- Max Sample Width 100 mm 4.0 in
- Eye End Diameter 31.7mm 1 1/4 in
- Weight of Blade
- Temperature Limits Ambient
- Span Adjustment 25 - 550mm 1.0 - 21.7 in
Applications
Determining the flexural properties of rigid and semi-rigid materials such as glass, ceramics, composites, wood and rigid plastics, etc...in the form of rectangular bars of standard or non-standard dimensions, moulded directly or cut from sheets or other shapes. The following properties can be determined:
- Flexural Stress at a given time of test
- Flexural Stress at the conventional deflection
- Flexural Stress at Maximum Load
- Flexural Stress at Rupture
- Apparent Modulus of Elasticity in Flexure (modulus of elasticity determined by flexure test)
Three Point bend Jig
Description
Three Point Flexural Jig Operating in compression only. Specimen supports of 10mm, 15mm, 20mm and 25mm (0.4, 0.6, 0.8, 1.0 in) diameter are supplied as standard.
Specification
- Maximum Capacity 30 kN at 200 mm 6744 lbs at 7.9 in
- Minimum Load Cell 100 N 22.5 lbs
- Max Sample Width 100 mm 4.0 in
- Eye End Diameter 31.7 mm 1 1/4 in
- Weight 11 Kg 24.3 lb
- Temperature Limits Ambient
- Span Adjustment 20 - 550 mm 0.79 - 21.7 in
- Span Support Diameter 10, 15, 20, 25 mm 0.4, 0.6, 0.8, 1.0 in
Applications
Determining the flexural properties of rigid and semi-rigid materials such as glass, ceramics, composites, wood and rigid plastics, etc...in the form of rectangular bars of standard or non-standard dimensions, moulded directly or cut from sheets or other shapes. The following properties can be determined:
- Flexural Stress at a given time of test
- Flexural Stress at the conventional deflection
- Flexural Stress at Maximum Load
- Flexural Stress at Rupture
- Apparent Modulus of Elasticity in Flexure
