W. D. Turner Company, Inc. Collet and Chuck Style Grips

TG167 $3647.00 (Set) Click Here for Spec Sheet

Capacity 100KN (22,481 lbf)

For Hollow Tube and Bar Stock
Circular Sliding, Wedge-Action (initial capstan tightening)
For samples 12mm to 45 mm (0.47 to 1.77 in)
Collets must be ordered separately
Collets are sold individually

TG16 $790.00 (Set) Click Here for Spec Sheet

Capacity 20 kN, 4496 lbf

Split Shoulder Profiled Chuck Grips for metal dumbbell samples. Two types are available: TG16/B for metric B test specimens for Tecquipment Type W Tensometer and TG16/C for metric C test specimens.

Specification

Maximum Capacity 20 kN 4496 lbf
Minimum Load Cell 100 N 4.5 lbf
Eye End Diameter 15.85 mm 0.62 in
Weight Each 1.0 Kg 0.44 lb
Length Each 38 mm 1.5 in
Temperature Limits Ambient

Applications

Straining a metal dumbbell sample, by tensile force, generally to fracture, and recording the relationship between force and extension to determine one or more of the following mechanical properties.

TG24 $1844.00 (Set) Click Here for Spec Sheet

Capacity 20 kN, 4496 lbf

Chuck Grips for high tensile flat plate metal dumbbell samples. A 7,94mm (5/16“)

clearance hole must be drilled in each end of the sample to locate the clamping

disks.

Specification

Maximum Capacity 20 kN 4496 lbf
Minimum Load Cell 100 N 4.5 lbf
Clamp Diameter 38 mm 1.5 in
Maximum Sample Width 35 mm 1.4 in
Maximum Sample Thickness 6 mm 0.24 in
Eye End Diameter 15.85 mm 0.62 in
Weight Each 0.7 Kg 1.54 lb
Length Each 85 mm 3.35 in
Temperature Limits Ambient

Applications

Straining a metal dumbbell sample, by tensile force, generally to fracture, and recording the relationship between force and extension.

TG153 $2026.00 (Set) Click Here for Spec Sheet

Capacity 10 kN, 2248 lbf

Description

Profiled Chuck Grips for testing pre-formed cement briquettes.

Specification

Maximum Capacity 10 kN 2248 lbf

Minimum Load Cell 100 N 22.5 lbf

Eye End Diameter 15.85mm 0.62 in

Weight Each 1 Kg 2.20 lb

Length Each 80 mm 3.15 in

Temperature Limits -70°C +300°C -94°F + 572°F

Applications

Used to determine the tensile strength of cement mortar by casting

and testing briquette samples.

Test method is similar to that described in ASTM C190:1985 (Standard

test method for tensile strength of hydraulic cement mortars)

Part Number	Description	Price
COT/0030/00	TG167 12-15mm Dia. Sample	$1,105.00
COT/0031/00	TG167 15-18mm Dia. Sample	$1,105.00
COT/0032/00	TG167 18-21mm Dia. Sample	$1,105.00
COT/0033/00	TG167 21-25mm Dia. Sample	$1,105.00
COT/0034/00	TG167 25-30mm Dia. Sample	$1,105.00
COT/0035/00	TG167 30-35mm Dia. Sample	$1,105.00
COT/0036/00	TG167 35-40mm Dia. Sample	$1,105.00
COT/0037/00	TG167 40-45mm Dia. Sample	$1,105.00